A Bronkhorst company

-Magnetic Flow Meter [5100 lpm]

Online price starting at: $460.38

  • Model: MVM-100-Q
  • Shipping Weight: 0.7kg
  • Brand: MAG-VIEW

Please Choose:



Qty Discounts Off Price
1-4
$460.38
5-9
$414.35
10+
$345.29
* Discounts may vary based on options above
Fully stocked, despatch </br> will be within 2 days.
Fully stocked, despatch
will be within 2 days.

Add to Cart:



Description

Features of magnetic flow meter

  • Makes liquid flows visible by
    • Pulse output
    • Blinking LED (red/green)
  • No mechanical wear
  • No moving parts
  • Ease of mounting and operation
  • Mounting in any position
  • Free pipe cross section
  • No additional pressure drop
  • Fast response (<100 ms)
  • Insensitive with contaminated liquids
  • Ideal solution for interference free operation combined with a long-life cycle
  • Can be used in areas where flow sensors with moving parts cannot be applied
  • Wide independence to the inlet and outlet pipe creates the advantage to be able to install in compact machines with cramped confines

Scope of delivery

  • Magnetic Flow Meter
  • Calibration certificate
  • Packing box
  • MAG-VIEW Manual
  • (optional) instrument cable

Flow Ranges

This magnetic flow meter is suitable to measure flows of water and other conductive liquids within a flow range of 5 .. 100 lpm.

Model

Min

Max

output signal starts

MVM-100-Q 5 l/min 100 l/min ~ 2 l/min

Video

Specs

Technical Specifications

Performance

Specifications

Accuracy* ± 1%RD
Repeatability 1%
Rangeability 1:20
Signal output
starting from
~ 2 l/min
Medium Water and other conductive liquids with a minimum
conductivity of 20 μS/cm (lower conductivity affects the accuracy)
Operating temperature
-10...60 °C (not freezing)
Operating pressure
10 bar(a) (20 °C), 8 bar(a) (40 °C), 6 bar(a) (60 °C)
Nominal diameter
DN 20
Process connection
G1'' BSP male thread
Flow indication
Green LED: flow proportional flashing; red LED: supply voltage
Response time
< 100 ms

Mechanical

Specifications

Materials (wetted parts)

Housing: ABS
Electrodes: Stainless Steel 316L
Process connections: PVDF
Measuring pipe: PVDF
Grounding rings: Stainless Steel 316L

Protection IP65

Electrical

Specifications

Frequency output

  Pulse rate
200 pulses/l
  Resolution
5 ml/pulse
  Signal shape
Square wave signal, duty cycle 50:50 (NPN or PNP)
  Signal current
<25 mA
Electrical connection
4-pin-plug M12x1
Power supply
24 VDC±15%
Power consumption
0.6 W
Electrical protection measures
short-circuit proof, polarity protection
Pin assignment
Pin assignment

PIN 1: +U
PIN 2: frequency output NPN or PNP
PIN 3: GND
PIN 4: frequency output NPN or PNP

We recommend using resistors of ~2.2kΩ
and 0.25 W for pull-up/pull-down wiring.

* test conditions: 23 °C

Pressure Drop

Pressure Drop of Magnetic Flow Meter

Electrical connection PNP or NPN

The MAG-VIEW™ has an NPN or PNP frequency signal depending on the configuration outlined below.

Electrical connection PNP of Magnetic Flow Meter           Electrical connection NPN of Magnetic Flow Meter

Dimensions

Dimensions

Dimensions of Magnetic Flow Meter

Applications

Applications

The fields of application for this magnetic flow meter are diverse:
  • Can be used in areas where flow sensors with moving parts (paddle wheel, turbine sensors) cannot be applied due to contaminated media
  • Sensor is intended for continuously measuring of flow rates or for dosing / batching of electrically conductive liquids with a minimum of 20µS/cm
  • Water distribution
  • Chemical feed
Water and aquaous conductive liquids

Photos

-Magnetic Flow Meter [5100 lpm]
-Magnetic Flow Meter [5100 lpm]
-Magnetic Flow Meter [5100 lpm]

To go with the items in your cart we also recommend...





Copyright © 2019 Mass Flow ONLINE B.V.