A Bronkhorst company

MASS-VIEW flow controller with display [Low Flow]

Online price starting at: $1,101.92

  • Model: MV-402
  • Shipping Weight: 1.4kg
  • Brand: MASS-VIEW

Please Choose:

Qty Discounts Off Price
* Discounts may vary based on options above
Temporarily out of stock.</br>Expected despatch in business days:
Temporarily out of stock.
Expected despatch in business days: 15

Add to Cart:


Features of mass flow controllers

  • Clear indication in:
    - actual flow rate (bar graph and value)
    - desired flow units
    - type of gas
    - totalised flow
  • Bright, wide-angle OLED display
  • Free of parallax error
  • Virtually independent of temperature and
    pressure variations
  • Low pressure drop
  • Wide flow ranges
  • Fast response
  • High accuracy
  • Electronic output:
    - Analog (0 .. 5 Vdc)
    - RS-232 interface (with FLOWBUS)
    - Modbus-RTU/ASCII interface
  • Configurable password protection
  • Alarm and counter functions
  • Relays
  • Multi Gas / Multi Range
  • 10 Pre-installed gases
  • Membrane operated valve
  • Digitally calibrated
  • Free software tools

Scope of delivery

  • MASS-VIEW flow controller
  • packing box
  • 9.17.054 Short form manual
  • (optional) fittings
  • (optional) power supply
  • (optional) Battery Pack

Download icon Download technical information of the MASS-VIEW

Pre-installed ranges


Flow range (relative Air)

Range 1
20 mln/min .. 2000 mln/min (sccm)
Range 2
20 mln/min .. 1000 mln/min (sccm)
Range 3
20 mln/min .. 500 mln/min (sccm)
Range 4
20 mln/min .. 200 mln/min (sccm)

Pre-installed gases

pre-installed gases

min. range .. max. range

Air, N2, O2, CO2,
CO and N2O
20 .. 2000 mln/min (sccm)

Ar 40 .. 4000 mln/min (sccm)
CH4, C3H8 and C4H10 10 .. 1000 mln/min (sccm)

Please note:
Our mass flow controllers are sold without fittings and without power supply, please use the 'Complementary products' tab to order additional accessories. For your convenience, we also have our flow ranges in other flow units.



Technical Specifications



Accuracy 2% RD for flow > 50% of max. capacity
(1% RD + 0.5% FS) on lower flows
Repeatability < 0.2% FS typical
Pre-installed gases Air, N2, O2, CO2, CO, N2O, Ar, CH4, C3H8 and C4H10
Standard calibration gas Air, other gases are converted using our Fluidat conversion model which will introduce extra inaccuracy
Media Non-hazardous gases; Helium excepted
Rangeability up to 1:100
Operating pressure 0 .. 10 bar(g) / 0 .. 150 psi(g)
Pressure coefficient
0.2% / bar typical at Air
Operating temperature 0 .. 50C (32 .. 122F)
Temperature coefficient Zero: <0.1%FS/C, Span: <0.2%RD/C
Attidude sensitivity < 0.1% FS
Response time (t63%) 2 s
Min. ΔP 1 bar(d)
Max. ΔP 7 bar(d)
Control accuracy Less than 0,5-1% RD/bar

* Notes:
- Mass flow units ln/min and SLM refer to normal operating conditions,
i.e. 0C (32F) and 1013 mbar (14.7 psi)
- Technical specifications are based on Air at maximum FS
- All specifications subject to change without notice



Materials (wetted parts) Meter: aluminium, Viton
Needle Valve: Fluorosint, Brass, Buna N
Controller: membrane Fiber-reinforced nitrile
Gas connections (in/out) G 1/4"BSPP female



Electrical connection 8-pin RJ-45 modular jack
Output analog: 0 .. 5 Vdc
digital: RS232 / RS485 (Modbus-RTU/ASCII)
Required supply voltage 15 .. 24 Vdc ( 10%)
Power consumption approx. 135 mA/ 2W
Min. and max. relay contracts switching current 0.5 A, 24 Vdc
one side grounded (0 Vdc power)



Test pressure 21 bar (a) / 300 psi (a)
Ingress protection IP-40
EMC EU declaration

Electrical Connection

Electrical Connection of Mass Flow Controller

Display Menu

The 4-way button with center push gives access to a user-friendly menu, e.g. for zero function, for selection of pre-installed gases in pre-installed ranges, setting of engineering units, alarm functions (minimum/maximum/counter limit) and counter functions. Password protection is provided to prevent unauthorizes changes. Below overview of the MASS-VIEW menu functions illustrates the great versatility of this product line.Display Menu of Mass Flow Controller



Dimensions of Mass Flow Controller



Download our technical documentation and software/drivers related to the MASS-VIEW Series



The fields of application for MASS-VIEW mass flow controllers are diverse:
  • Burner Control (furnace construction)
  • Welding (welding gas monitoring)
  • Leak measurements (quality, environment)
  • Coating (equipment construction)
  • Regulation of gaseous atmospheres (biotechnology)
  • Measurements of gas consumption (hospitals)
  • Test equipment (production maintenance)
  • Local preparation of a gas mixture
  • Flow rate monitoring (laboratories)
  • Cutting (steel sheets)
  • Cost centre billing
  • Analytical equipment
  • Aeration / sparging (food products, ice cream / edible oils
  • Blanketing (food)
  • Fermentation (food, biotechnology, pharma)


MASS-VIEW flow controller with display [Low Flow]
MASS-VIEW flow controller with display [Low Flow]

Copyright © 2021 Mass Flow ONLINE B.V.