MVM-001-PA
Low-Flow Magnetic Inductive Flow meters for water-like liquids
- Compact, weatherproof (IP65) design
- No moving parts (no mechanical wear)
- Interference free operation
- Independence to inlet/outlet pipework
- Fast response
- Free pipe cross section: low ΔP, insensitive to contamination
MVM-001-PA Magnetic Flow Meter
When every drop matters, accurate flow measurement becomes critical. Many flow sensors struggle at very low flow rates, leading to instability, wear, or maintenance issues. The MVM-001-PA is designed specifically to deliver stable, high-precision performance in microflow applications.
Ultra-precise measurement at very low flow rates
The MVM-001-PA accurately measures flow ranges from 0.0083 to 1 l/min, making it ideal for dosing and micro-flow processes where consistency directly impacts quality and efficiency.
Typical applications
- Water treatment and distribution systems
- AdBlue (DEF) dosing and SCR exhaust solutions
- Laboratory and testing equipment
- Cooling water and wastewater monitoring
- Chemical dosing and mixing processes
- Agriculture (fertilizers, water, pesticides)
- Concrete additive mixing
- Marine emission control systems
Maintenance-free and highly reliable design
Built on a magnetic inductive measuring principle, the sensor has no moving parts, eliminating mechanical wear and reducing maintenance requirements. It performs reliably even with slightly contaminated liquids.
- No mechanical wear (no moving parts)
- Resistant to contamination
- Minimal pressure drop due to full-bore design
- Fast response time (<500 ms)
- Stable and interference-free operation
- IP65 weatherproof housing for industrial environments
Flexible installation in compact systems
Thanks to its compact design and independence from inlet and outlet piping, the MVM-001-PA can be installed in virtually any position, even in tight machine layouts. This makes integration simple and efficient without redesigning existing pipework.
With more than 25,000+ units installed worldwide, this flow meter is a proven solution in demanding industrial environments where long-term reliability is essential.
A compact sensor that brings control, accuracy, and durability together in one solution.
Flow ranges
This magnetic flow meter is suitable to measure flows of water and other conductive liquids within a flow range of 0.0083 .. 1 lpm.
| Model | Min | Max | output signal starts |
|---|---|---|---|
| MVM-001-PA | 0.0083 l/min | 1 l/min | ~ 0.0050 l/min |
Scope of delivery
- Magnetic Flow Meter
- Calibration certificate
- Packing box
- MAG-VIEW Manual
- (optional) instrument cable
Features of MVM-001-PA Magnetic Flow Meter
- Makes liquid flows visible by
- Blinking LED (red/green)
- Frequency output and Analog output (4..20 mA)
- No mechanical wear
- No moving parts
- Ease of mounting and operation
- Mounting in any position
- Free pipe cross section
- No additional pressure drop
- Fast response (<500 ms)
- Insensitive with contaminated liquids
- Ideal solution for interference free operation combined with a long-life cycle
- Can be used in areas where flow sensors with moving parts cannot be applied
- Wide independence to the inlet and outlet pipe creates the advantage to be able to install in compact machines with cramped confines
Technical specifications
Measurement / control system
± 2% FS for > 50% of full scale range
(minimum conductivity of 50 μS/cm)
Mechanical parts
Electrodes: Stainless Steel 1.4571
Process connections: Stainless Steel 1.4571
Measuring pipe: PEEK-GF30
Gasket: EPDM
Electrical properties
Resolution : 0,1 ml/pulse
Signal shape : Push-Pull
PIN 2: analog output 4..20mA
PIN 3: GND
PIN 4: frequency output
PIN 5: do not connect
Downloads
Brochures
Declaration of Conformity
Stepfile
Applications
The fields of application for this magnetic flow meter are diverse:
- Can be used in areas where flow sensors with moving parts (paddle wheel, turbine sensors) cannot be applied due to contaminated media
- Sensor is intended for continuously measuring of flow rates or for dosing / batching of electrically conductive liquids with a minimum of 50µS/cm
- Water distribution
- Chemical feed
Frequently Asked Questions
- Can the MAG-VIEW QA-series be used with low viscosity mineral slurries?
- Is the MAG-VIEW sensitive to air bubbles?
- MAG-VIEW export codes (TARIC, HS, ECCN and Country of origin)
- The fluid conductivity changes during the measurements, is that a problem?
- Can the MAG-VIEW be used with demineralized – deionized water?
More questions on our FAQ page