A Bronkhorst company

Magnetic Flow Meter [5 .. 250 lpm]

Online price starting at: $691.15

  • Model: MVM-250-PN
  • Shipping Weight: 0.9kg
  • Brand: MAG-VIEW

Please Choose:

Qty Discounts Off Price
* Discounts may vary based on options above
Fully stocked, despatch </br> will be within 2 days.
Fully stocked, despatch
will be within 2 days.

Add to Cart:


Features of Magnetic Flow Meter

  • Makes liquid flows visible by
    • Pulse output
    • Blinking LED (red/green)
  • No mechanical wear
  • No moving parts
  • Ease of mounting and operation
  • Mounting in any position
  • Free pipe cross section
  • No additional pressure drop
  • Fast response (<500 ms)
  • Insensitive with contaminated liquids
  • Ideal solution for interference free operation combined with a long-life cycle
  • Can be used in areas where flow sensors with moving parts cannot be applied
  • Wide independence to the inlet and outlet pipe creates the advantage to be able to install in compact machines with cramped confines

Flow Ranges

This magnetic flow meter is suitable to measure flows of water and other conductive liquids within a flow range of 5 .. 250 lpm.




Output signal starts

MVM-250-PN 5 l/min 250 l/min ~ 4 l/min



Technical Specifications



Accuracy 1.5% RD, 0.3% FS
Reproducibility 1%
Rangeability 1:50
Signal output
starting from
~ 4 l/min
Medium Water and other conductive liquids with a minimum
conductivity of 50 μS/cm (lower conductivity affects the accuracy)
Operating temperature
-20...90 C
Nominal pressure
PN 16
Nominal diameter
DN 20
Process connection
1'' BSP male thread
Flow indication
LED green, flow proportional flashing
Response time
< 500 ms



Materials (wetted parts)

Housing: Aluminium pressure diecasted
Electrodes: Stainless Steel 1.4571
Process connections: Stainless Steel 1.4571
Measuring pipe: PEEK-GF30
Gasket: EPDM

Protection IP65 and IP67 with MFO.CB.25



Frequency output

Pulse rate
100 pulses/l
10 ml/pulse
Signal shape
Square wave signal, duty cycle 50:50
Push-Pull NPN open collector [o.c.] PNP o.c.
Signal current
max. 100 mA, current limited
Electrical connection
5-pin-plug M12x1
Power supply
24 VDC10%
Power consumption
max. 150 mA
Pin assignment
Pin assignment PIN 1: +U
PIN 2:
PIN 4: frequency output NPN
PIN 5: do not connect

Pressure Drop

Pressure Drop of Magnetic Flow Meter

Connection to a PLC

Most digital PLC inputs are designed for connection to PNP signals. The MAG-VIEW has an NPN frequency signal with an integrated 2kΩ pull-up resistor. Its signal current of ~12 mA is recognised as a signal by the current PLC. Thus, operating a MAG-VIEW with a PLC should not present any problems. The frequency output of the MAG-VIEW should be attached to a digital input of the PLC.

Electric connection to a PLC Pressure Drop of Magnetic Flow Meter



Dimensions of Magnetic Flow Meter



The fields of application for this magnetic flow meter are diverse:
  • Can be used in areas where flow sensors with moving parts (paddle wheel, turbine sensors) cannot be applied due to contaminated media
  • Sensor is intended for continuously measuring of flow rates or for dosing / batching of electrically conductive liquids with a minimum of 50S/cm
  • Water distribution
  • Chemical feed
Water and aquaous conductive liquids


Magnetic Flow Meter [5 .. 250 lpm]
Magnetic Flow Meter [5 .. 250 lpm]

To go with the items in your cart we also recommend...

Copyright © 2021 Mass Flow ONLINE B.V.