High quality products
Guaranteed delivery
Shipment in 2 business days
Safe shopping
Payment options: Credit Card, PayPal or Bank transfer
MV-301 Mass flow regulator

Mass Flow Regulator for gases with integrated display

  • Direct thermal mass flow measurement
  • High accuracy
  • 4 pre-installed gases
  • Bright, graphical OLED display
  • Digital or analog output; alarm and counter functions
  • High precision needle valve
Multi gases
HR
Valve
MV-301 Mass flow regulator
MV-301 Mass flow regulator
MV-301 Mass flow regulator
MV-301 Mass flow regulator

MV-301 Mass flow regulator

Mass Flow Regulator for gases with integrated display

  • Direct thermal mass flow measurement
  • High accuracy
  • 4 pre-installed gases
  • Bright, graphical OLED display
  • Digital or analog output; alarm and counter functions
  • High precision needle valve
Online price starting with:
$855.75
Fully stocked
Dispatch will be within 2 days

Qty Discounts Off Price

Amount
6+
10+
20+
50+
Discount
2.5%
5%
7.5%
10%
Price
€834.36
€812.96
€791.57
€770.18

Pre-installed ranges

Ranges
Flow range (relative Air)
Range 1
10 mln/min .. 200 mln/min (sccm)
Range 2
10 mln/min .. 100 mln/min (sccm)
Range 3
10 mln/min .. 50 mln/min (sccm)

Pre-installed gases

Gases
min. range .. max. range
Air, N2, Oand CO
10 .. 200 mln/min (sccm)

Features of MV-301 Mass flow regulator

  • Clear indication in:
    - actual flow rate (bar graph and value)
    - desired flow units
    - type of gas
    - totalised flow
  • Bright, wide-angle OLED display
  • Free of parallax error
  • Virtually independent of temperature and
    pressure variations
  • Low pressure drop
  • Wide flow ranges
  • Fast response
  • High accuracy
  • Electronic output:
    - Analog (0 .. 5 Vdc)
    - RS-232 interface (with FLOWBUS)
    - Modbus-RTU/ASCII interface
  • Configurable password protection
  • Alarm and counter functions
  • Relays
  • Multi Gas / Multi Range
  • 10 Pre-installed gases
  • High resolution needle valve
  • Digitally calibrated
  • Free software tools

Scope of delivery

  • MASS-VIEW flow meter
  • packing box
  • 9.17.054 Short form manual
  • (optional) fittings
  • (optional) power supply
  • (optional) Battery Pack

Please note:
Our mass flow meters are sold without fittings and without power supply, please use the 'Accessories' tab to order additional accessories. For your convenience, we also have our flow ranges in other flow units.


Technical specifications

Measurement / control system

Flow range
10 mln/min .. 200 mln/min (sccm)
Mass flow units ln/min and SLM refer to normal operating conditions, i.e. 0°C (32°F) and 1013 mbar (14.7 psi)
Accuracy
± 2% RD for flow > 50% of max. capacity
± (1% RD + 0.5% FS) on lower flows
Technical specifications are based on Air at maximum FS
Repeatability
< 0.2% FS typical
Operating pressure
0 … 10 bar(g) / 0 … 150 psi(g)
Pressure coefficient
0.2% / bar typical at Air
Pre-installed gases
Air, N2, O2, CO
Standard calibration gas
Air, other gases are converted using our Fluidat® conversion model which will introduce extra inaccuracy
Rangeability
up to 1:20
Response time (sensor)
(t63%) 2 seconds
Operating temperature
0 … 50 °C (32 … 122°F)
Temperature coefficient
Zero: <0.1%FS/°C, Span: <0.2%RD/°C
Leak integrity, outboard
tested < 2 x 10-9 mbar l/s He
Attitude sensitivity
< 0,1 % FS

Mechanical parts

Material (wetted parts)
Meter: aluminium, Viton® (FPM)
Needle Valve: Fluorisint, Brass, Buna N
Process connections
G 1/4" BSPP female
(compression fittings optional)
Seals
Viton®, PTFE
Weight
0.7 kg
Ingress protection
IP40

Electrical properties

Power supply
+15 … 24 Vdc (+/- 10%)
Max. power consumption
approx. 135 mA
Output
0 .. 5 Vdc
EMC
EU declaration
Digital Communication
RS232 / RS485 (Modbus-RTU/ASCII)
Min. And max. Relay contacts
switching current 0.5 A, 24 Vdc
one side grounded (0 Vdc power)
Electrical connection
8-pin RJ-45 modular jack

Product details

Hook-up diagram
Hook-up diagram
Dimensions MV-1XX and MV-3XX
Dimensions MV-1XX and MV-3XX
Pressure drop MV-301 for Air
Pressure drop MV-301 for Air


Applications

The fields of application for MASS-VIEW® mass flow meters are diverse:

  • Burner Control (furnace construction)
  • Welding (welding gas monitoring)
  • Leak measurements (quality, environment)
  • Coating (equipment construction)
  • Regulation of gaseous atmospheres (biotechnology)
  • Measurements of gas consumption (hospitals)
  • Test equipment (production maintenance)
  • Local preparation of a gas mixture
  • Flow rate monitoring (laboratories)
  • Cutting (steel sheets)
  • Cost centre billing
  • Analytical equipment
  • Aeration / sparging (food products, ice cream / edible oils
  • Blanketing (food)
  • Fermentation (food, biotechnology, pharma)